1. Unroll the PremierTuff Rolls in the room and let them sit for 48 hrs. This allows the rubber to do any expanding or contraction. 
2. Using a utility knife, cut the rolls to fit required dimensions. 
3. Once the rolls are cut spread the adhesive on the floor using a 1/16" trowel and lay the mats down, the seams should butt up together tightly to avoid gaps. 
4. Once the floor is completed put 2'X4' weights, or 5 gallon buckets to adhere pressure to the floor.

**NOTE: If adhesive is spilled on face of PremierTuff Rolls wipe off with polyurethane thinner or acetone.

Maintenance 
For general cleaning use a shop-vac or broom to clean the mats. You can also use hot light soapy water with a sponge mop to clean the mats.
**DON'T EVER POUR WATER DIRECTLY ON THE MATS.
**NEVER USE HARSH CHEMICALS OR DETERGENTS ON THE MATS.


(5 year Warranty on Manufacturer Defects)